 
MR900 Depositor
The MR900 series depositor is pneumatically operated and can be supplied with four sizes of product cylinder. This provides an accurate depositing weight range of 20-1250g, up to 60 cycles per minute. The machine is extremely robust and is designed to withstand the most demanding conditions with the minimum maintenance. ‘Lubrication free’ pneumatic components can be fitted as an option.
CIP Clean in Place
All existing MR900 depositors can be fitted with a CIP (clean in place) Retro Kit for incorporation into existing CIP systems or can be supplied with Apple Engineering's own stand alone CIP unit.
MR2000 Depositor
The MR2000 Depositor is a precisionly built unit which operates by compressed air. Each unit has the capability of depositing between 100–2000ml per cycle, ensuring a high degree of accuracy throughout the weight range. The MR2000 depositor is a versatile machine designed to be simple and efficient in operation. With minimal moving parts in contact with the product, cleaning time is kept at a minimum and routine maintenance suitable for semi-skilled operators. A wide range of nozzles/dispersing heads and special outlets are available and easily interchanged to maximise the units capability to suit all customers requirements. Product variability poses no problems for the MR2000 as various equipment is available to allow both liquid and viscose products to be handled efficiently either via gravity feed hopper (with or without auger screw) or direct via pressure feed systems whichever is the most suited to customer requirements.
MR150 Mini Meterite Depositor
The MINI-METERITE MR150 series depositor is fitted with a standard product cylinder giving a weight range of 2-150ml. The weight control is easily adjusted in seconds. The machine is available with a standard 14 litre or 28 litre conical hopper, however common hoppers with multiple outlets can be supplied (for multi lane systems). A total of 250mm of height adjustment is available when the unit is fitted to the telescopic stand. An intermediate height stand can be supplied for use with the flexible handgun outlet.
MD65 Micro Depositor
The MD65 series Micro Depositor was designed to compliment the existing range of Apple depositors, particularly to offer unbelievable accuracy over a small deposit range and provide a speed uncommon in most volumetric filling machines. A cycle rate of up to 90 cycles per minute is possible. Typical products range from smooth sauces and homogenized creams to particulate materials like Vol au Vent fillings and sweet mincemeat's. Accuracy of within 0.2g is common on most materials. Reliability in demanding operating conditions is guaranteed due to robust design, full pneumatic operation and total stainless steel construction.
Positive Pressure
Depositing/Injection Unit.
After almost 15 years of joint projects throughout Europe and the rest of the world. Apple Engineering Ltd are pleased to announce the exclusive UK representation of the Tanis Food Tec Company. Following on from this venture Apple have Launched their new revolutionary positive pressure depositing/injection unit. The unit comes in various weight ranges (1-35 mls), (20-100 mls) as standard, additional weight ranges can be achieved to customers specification. Products ranging from batters with inclusions, fondants, aerated chocolates etc, can be deposited in a controlled manner with individual piston/measuring chambers each dedicated to it's own product volume dispensation, accordingly each piston is capable of individual infinite accuracy.
Low Level Easy Fill MR900
Simplicity is the main feature of the Low level Easy Fill MR900, allowing unskilled operators to easily strip down the machine for cleaning and product changeovers. Deposit volume and speed controls can be adjusted in seconds. The MR900 series depositor is pneumatically operated and can be supplied with four sizes of product cylinder. This provides an accurate depositing weight range of 20-1250g, up to 60 cycles per minute. The machine is extremely robust and is designed to withstand the most demanding conditions with the minimum maintenance. ‘Lubrication free’ pneumatic components can be fitted as an option.
MR900 on Intermediate Stand
TP1750 Transfer Pump
The new TP1750 transfer pump is
built to the same high standards as our proven range of METERITE
depositors. Constructed throughout in Stainless Steel. Fully pneumatic
in operation and capable of pumping 2.25 tonnes per hour at 20 cycles
per minute. Whisper quiet in operation, the TP1750 is built with minimum
components for easy strip down and product changeovers. The unique
modular pump mechanism can be fitted with an interchangeable butterfly
or lost movement piston depending on product viscosity, allowing
delicate food products to flow totally unrestricted.
Meterite Transfer Pump
The METERITE Transfer Pump is built to the same high standards as our proven range of METERITE depositors. Constructed throughout in 316 grade stainless steel. Fully pneumatic in operation complete with 89mm bore product cylinder giving a capacity of 1.25 litres per cycle at a maximum speed of 30 cycles per minute. Available in three different configurations allowing the user absolute versatility. Delicate food products are no problem for the METERITE transfer pump due to the large ported rotary D valve which allows products to flow totally unrestricted. Picture (above) shows the METERITE transfer pump mounted on a floor level stand supplying product to a MR900 depositor. Product supplied by a fully mobile holding tank.
Pro-Portioner
20
The New PRO-PORTIONER 20 is an
all electric tabletop depositing system designed to deposit a wide range
of smooth free-flowing products to an outstanding repeatable accuracy
through it’s easy to use operator panel. The pro-portioner can be fitted
with a wide range of outlets. The outlets can range from a simple tube
outlet to a flexible hand gun with trigger for depositing liquids, gels,
batters (even with small particulates) to injection needles (to inject
cakes, buns, with jams creams etc). The quick strip down feature for
cleaning and hygiene is a real benefit on short product run changeovers,
making it ideally suited for laboratories, test kitchens and small to
medium production facilities.
Click Here
to watch
video Contra Rotating Paddle Blender
The BM300 series paddle blender is manufactured to the same high standards as our proven range of depositing equipment and is manufactured throughout in stainless steel. Available in both fixed speed and variable speed models with the option of forward and reverse facility, the BM300 offers Mixing & Blending in minimal time with no product damage.
ED300 Electro/Pneumatic Depositor
The ED300 Series Electro/Pneumatic Depositor has been specifically designed to meet the demands of today's automated production industry. All machine adjustments for depositing volumes and operating speeds are rapidly selected on the user friendly operator panel. A pre-programmed menu is available for multiple product selection. Maintenance and operation diagnostics are easily monitored to enhance production efficiency. The ED300 Electro/Pneumatic depositor can be supplied for single or multi lane applications with mounting configurations to suit individual requirements. The depositor incorporates a safety device which guarantees the power supply is isolated prior to disassembly. In order to read PDF files, you need to have Adobe® Acrobat® Reader® installed in your computer. You can download the latest Acrobat® Reader® for free from Adobe's website.
|
|
|